Back to Wood oil

ARSINOL® Wood Oil

Series: 0173

Care and protection of furniture, decking and other exterior

ARSINOL®  Wood Oil is an oil for exterior use, developed based on linseed oil and lightfast pigments and active ingredients.  Arsenal® Wood Oil is used for treatment of hardwood and other wood surfaces. ARSINOL®  Wood Oil gives the wood a water-repellant surface, and highlight the natural appearance, color and glow. ARSINOL®  Wood Oil penetrates deep into the wood and leaves no skin or greasy surface during treatment.

Colours: See available colours
Package dimensions: 2,5 l.
Coverage: 14 m²/L.
Dry time: The touch dry after approx. 2 hours at 20°C, but must dry for at least 8 hours without water and moisture.
Application: Lint-free rags or paint bruch, undiluted.
The temperature must be between 5°C and 25°C. Wipe off any excess oil after 5 - 15 minutes.
Type: Solventborne
Riskicons: GHS 08
Riskwords: Danger
Risk: - May be fatal if swallowed and enters airways.
- Harmful to aquatic life with long lasting effects.
- Contains 3-iod-2-propynylbutylcarbamat, IPBC, Alkylammonium salt. May produce an allergic reaction.

Treatment:
Clean the wood for dirt with a stiff brush. Coverings can be removed using FAXE Decking Cleaner. Keep surface coatings wet until completed i.e. coat one or two boards in their full length to avoid unsightly overlapping. Avoid application in direct sunlight. Masonry should be covered thoroughly, as brick is highly absorbent and stains are difficult to remove. When the wood becomes weather-worn and is no longer water repellant, treat it again with Arsinol® Wood Oil.


This product has been developed for exterior use.

NOTE!
Risk of spontaneous ignition. Spilled, used rags etc. collected, stored in a fireproof container and is destroyed.

Colour Shine Item number Description
0173-04421 Cedar
0173-04420 Mahogany
0173-00028 Teak
Technical datasheets: Download (En-GB)
Download (Da-DK)
Safety sheets: Find det her
Lommeregner

Contact


Salg og kundeservice +45 75 12 86 00

Trustpilot